Zasilacz impulsowy 56VDC, 1.2A (max 67W) o niskim poziomie zakłóceń

• OUTPUT
  SAFETY MODEL NO PF-560120 DC VOLTAGE 56V RATED CURRENT 1.2A CURRENT RANGE 0-1.2A RATED POWER 68W RIPPLE& NOKISE(max.) Note.3 100mVp-p VOLTAGE TOLERAN CE Note.4 ±5% LINE REGULATION  Note.5 ±1% LOAD REG ULATION Note.6 ±5% SETUP,RISE TIME Note.8 1000ms,50ms/115VAC at full load HOLD UP TIME(Typ) 20ms/230VAC 10ms/115VAC at full load
• INPUT
  VOLTAGE RANGE  Note.9 90-264VAC 100-240VDC FREQUENCY CTOR(Typ) 50-60HZ EFFICIENCY(Typ.) 87% AC CURRENT(Typ.) 1.5A/115VAC&230VAC INSRUSH CURRENT(max.) 50A/230CAC LEAKAGE CURRENT(max) 1mA/240VAC
• PROTECTION OVERLOAD
  120-300% reated output power Protection type:Hiccup mode,recovers automatiocally after condition is removed
• ENVIRONMENT
  WORKING TEMP 0～+40℃(Refer to "Derating Curve")
  WORKING HUMIDITY 0～85% RH non-condensing STORAGE TEMP.,HUMIDITY ,-10～+60℃,10～80%RH
  TEMP.COEFFICIENT ±0.03%/℃(0-40℃)
  VIBRATION
  10-500HZ,2G 10min./1cy cle,period for 60min,each along X,Y,Z axe
• OTHER
  MTBF 1000K Hrs min,MIL-HDBK-217F(25℃)
  DIMENSION 115.06*55.06*32mm(L*W*H)
  PACKING 0.28kg,50PCS/14.0KG/1CUFT
• CONNECTOR PLUG 5.5*2.1*10mm
• NOTICES
  1.All parameters are specified at 230VAC input,rated load,25℃ 70% RH ambient.
  2.DC voltage:The output voltage set at point measure byplug terminal & 50% load
  3.Ripple& noise are measured at 20MHz by a 12 twisted pair terminated with a  0.1uf &47uf capacitor.
  4.Tolerance:includes set up tolerance,line regulation,load regulation.
  5.Line regulatiion is measured from low line to high line at rated load.
  6.load regulation is measured from 10% to 100% rated load.
  7.The power supply is considered as an independent unit,but the final equipment  still need to re-confirm that the whole system complies with the EMC directives.
  8.Length of set up time is measured at first cold start.Turning ON/OFF the power  supply may lead to increase of the set up time.
  9.Derating may be needed under low input voltages,Please check the derating curve  for more edtails.