Zasilacz impulsowy 56VDC, 1.2A (max 67W) o niskim poziomie zakłóceń
- OUTPUT
SAFETY MODEL NO PF-560120 DC VOLTAGE 56V RATED CURRENT 1.2A CURRENT RANGE 0-1.2A RATED POWER 68W RIPPLE& NOKISE(max.) Note.3 100mVp-p VOLTAGE TOLERAN CE Note.4 ±5% LINE REGULATION Note.5 ±1% LOAD REG ULATION Note.6 ±5% SETUP,RISE TIME Note.8 1000ms,50ms/115VAC at full load HOLD UP TIME(Typ) 20ms/230VAC 10ms/115VAC at full load
- INPUT
VOLTAGE RANGE Note.9 90-264VAC 100-240VDC FREQUENCY CTOR(Typ) 50-60HZ EFFICIENCY(Typ.) 87% AC CURRENT(Typ.) 1.5A/115VAC&230VAC INSRUSH CURRENT(max.) 50A/230CAC LEAKAGE CURRENT(max) 1mA/240VAC
- PROTECTION OVERLOAD
120-300% reated output power Protection type:Hiccup mode,recovers automatiocally after condition is removed
- ENVIRONMENT
WORKING TEMP 0~+40℃(Refer to "Derating Curve") WORKING HUMIDITY 0~85% RH non-condensing STORAGE TEMP.,HUMIDITY ,-10~+60℃,10~80%RH TEMP.COEFFICIENT ±0.03%/℃(0-40℃) VIBRATION 10-500HZ,2G 10min./1cy cle,period for 60min,each along X,Y,Z axe
- OTHER
MTBF 1000K Hrs min,MIL-HDBK-217F(25℃) DIMENSION 115.06*55.06*32mm(L*W*H) PACKING 0.28kg,50PCS/14.0KG/1CUFT
- CONNECTOR PLUG 5.5*2.1*10mm
- NOTICES
1.All parameters are specified at 230VAC input,rated load,25℃ 70% RH ambient. 2.DC voltage:The output voltage set at point measure byplug terminal & 50% load 3.Ripple& noise are measured at 20MHz by a 12 twisted pair terminated with a 0.1uf &47uf capacitor. 4.Tolerance:includes set up tolerance,line regulation,load regulation. 5.Line regulatiion is measured from low line to high line at rated load. 6.load regulation is measured from 10% to 100% rated load. 7.The power supply is considered as an independent unit,but the final equipment still need to re-confirm that the whole system complies with the EMC directives. 8.Length of set up time is measured at first cold start.Turning ON/OFF the power supply may lead to increase of the set up time. 9.Derating may be needed under low input voltages,Please check the derating curve for more edtails.
|
|